Water sanitation, bather safety, and health code compliance—these are the major items health officials focus on when inspecting public pools and spas. The Taylor Technologies K 2009 test kit is designed for such compliance inspections.
- Kit features a hard shell case that contains all the products.
- Includes - 2000 Series Comparator, Bottle, Instructions.
- Also included is a 64-page, waterproof Pool and Spa Water Chemistry - A Testing & Treatment Guide. Written by experts in water chemistry, this waterproof booklet contains information about sanitation and water balance, as well as tables for water treatment. Valued for its concise explanations and chemical treatment tables.
- Reagents - .75 oz Bottles of R-0003, R-0004, (6) R-0013, 10g R-0870
With Taylor’s reputation as “the most trusted name in water testing,” you can count on accurate and reliable test results.
| Analyte | System | Method/Chemistry | Standard/Equivalance or Description | Comparator | Cell |
|---|
| Chlorine, Free & Combined | Drop test | FAS-DPD | 1 drop = 0.2 or 0.5 ppm chlorine (Cl₂) | 9058 | NA |
| Cyanuric Acid | Visual determination | Turbidimetric | 30, 40, 50, 60, 70, 80, 90, 100 ppm CYA | 9058 | NA |
| pH | 2000 Series comparator | Phenol red | 7.0, 7.2, 7.4, 7.6, 7.8, 8.0 | 9058 | NA |
REAGENT SHELF LIFE
All reagents have a shelf life, whether they are liquids, powders, crystals, tablets, or test-strip pads. If kept dry, powders and crystals are very stable; acids are also long lived. Date of manufacture is not the controlling factor when it comes to shelf life—storage conditions are more important. As with all perishables, reagents are sensitive to environmental influences and will last longer under controlled conditions.
To this end, we recommend:
- Storing reagents at a consistent temperature in the range if 36°–85°F (2°–29°C); extreme temperature fluctuation, say from a refrigerator to a hot car trunk, causes reagents to deteriorate.
- Keeping them out of prolonged direct sunlight. (Note: their brown plastic bottles help protect very light-sensitive reagents.)
- Segregating reagents from containers of treatment chemicals.
- Replacing caps immediately and tightening them carefully so that exposure to air and humidity is limited.
- Avoiding switching bottle caps, placing bottle caps on soiled surfaces, repouring reagents into contaminated containers, or touching test strip pads.
Taylor formulates its reagents to remain effective for at least one year, with only very few exceptions (molybdenum indicator in liquid form is one; after four months old it should be tested against a standard periodically). As a general precaution, replace all reagents more than one year old, or at the beginning of a new testing season.
Click to view and download additional resources: