Pool and Spa Fittings Parts

Description CMP 25526-201-000 1-1/4" Gray Vinyl Extension Collar for Inground Skimmers - This Extension Collar is for use with CMP in-ground skimmers and skimmer model SP1070P. Its purpose is to raise the skimmer cover to the pool deck level. The smaller end fits inside the skimmer and the collar is placed on top of the skimmer.

Description Super-Pro® 25552-201-000 1.5" MPT Gray Hydrostream Fitting with 0.5" Opening is a replacement part designed to fit standard adapters or wall fittings in your pool. This fitting comes with a ball which can be moved to direct water flow and ensure proper distribution. The inlet fitting typically consists for the body, retaining ring and adjustable ball.

Description Super-Pro® 25552-401-000 1.5" MPT Gray Hydrostream Fitting with 1" Opening is a replacement part designed to fit standard adapters or wall fittings in your pool. This fitting comes with a ball which can be moved to direct water flow and ensure proper distribution. The inlet fitting typically consists for the body, retaining ring and adjustable ball.

Description Super-Pro® 25552-301-000 1.5" MPT Gray Hydrostream Fitting with 3/4" Opening is a replacement part designed to fit standard adapters or wall fittings in your pool. This fitting comes with a ball which can be moved to direct water flow and ensure proper distribution. The inlet fitting typically consists for the body, retaining ring and adjustable ball.

Description This Hydrostream Fitting with slotted opening helps to return water into your pool. It has five opening sizes and a 1.5" MPT fitting. Replace it as needed for optimal performance.

Description 1/2" Asco Solenoid Valve 12V - This Solenoid Valve is a dependable replacement part. It is an electrically controlled valve. Made for easy installation and use, this part will help ensure the best service life possible.

Description 1/2" Asco Solenoid Valve 12V - This Solenoid Valve is a dependable replacement part. It is an electrically controlled valve. Made for easy installation and use, this part will help ensure the best service life possible.

HVAC thermowells protect temperature sensors from flow, high pressure, and harsh environments. Thermowells allow sensors to accurately measure liquid temperatures without substantially insulating the sensors. Also known as immersion wells, aquastat wells, and bulb wells, they consist of a tube that's closed at one end and mounted in the stream. The temperature sensor inserts into the open end of the tube, which is typically in the open air outside the pipe or vessel. ...

Description –Solenoid Enclosures Standard: RedHat II - Watertight, Types 1, 2, 3, 3S, 4, and 4X; RedHat - Type I.Optional: RedHat II - Explosionproof and Watertight, Types 3, 3S, 4, 4X, 6, 6P, 7, and 9; Red-Hat - Explosionproof and Watertight, Types 3, 4, 4X, 7, and 9. (To order, add prefix "EF" to catalog number, except Catalog Numbers 8210B057, 8210B058, and 8210B059, which are not available with Explosionproof enclosures.) See Optional Features Section for other available options. ...

Product Description This skimmer is engineered to meet NSF 50 and SPS 3 standards, highlighting its commitment to quality and safety. The adjustable collar and new weir clip lock enhance the skimmer's functionality, providing secure and reliable operation. A large, self-contained basket with a lock-in feature ensures that debris is captured without floating away, while underwater dampers reduce noise, making it especially quiet even on windy days. The skimmer's construction utilizes a super...

Description This is the Hayward WGX1048E Round Cover For Suction Outlet, a white 8 inch round main drain suction outlet cover only for floor or wall applications. All Hayward WG Series suction outlets and replacement covers are VGB compliant and are tested to ASME A112 19.8b-2009 and ANSI/APSP-16 standards as well as meeting CPSC requirements. Hayward drain covers can be used as a single replacement cover when installed on the same suction line as an EcoStar SVRS or a Stratum SVRS. ...

Description:High Limit strap-on mounting Manual Reset Aquastat Controller with 100F to 240F operating temperatureIncludes: Bracket for strap-on mounting, stop factory-set at 240F (116C), and heat-conductive compound. Application: High Limit strap-on mounting on well mount.Insulation Depth (in.): 1 1/2 in.Insulation Depth (mm): 38 mmBulb Size (in.): 3/8 in. x 2 7/8 in. copperBulb Size (mm): 10 mm x 73 mm copperSwitching Action: SPST, contacts break on temperature rise.Operating Temperature...

Waterway Manifold 672-4430 This Manifold is manufactured for Dynasty Spas by Waterway. Designed, Engineered & Manufactured in the U.S.A. Waterway Plastics is proud to design, engineer and produce our quality line of products right here in the USA, using only premium NSF Approved materials & meeting all Certifications and Standards, at our 460,000 sq. ft. facility in Oxnard, CA. Waterway, committed to innovation & excellence since 1973. 2"S x 2"S x (4) 1/2"S Ports ...

Waterway Manifold 672-4110 This Manifold is manufactured for Dynasty Spas by Waterway. Designed, Engineered & Manufactured in the U.S.A. Waterway Plastics is proud to design, engineer and produce our quality line of products right here in the USA, using only premium NSF Approved materials & meeting all Certifications and Standards, at our 460,000 sq. ft. facility in Oxnard, CA. Waterway, committed to innovation & excellence since 1973. 2"S x 2"S x (6) 1/2"S Ports ...

Waterway Manifold 672-7910 This Manifold is manufactured by Waterway. Designed, Engineered & Manufactured in the U.S.A. Waterway Plastics is proud to design, engineer and produce our quality line of products right here in the USA, using only premium NSF Approved materials & meeting all Certifications and Standards, at our 460,000 sq. ft. facility in Oxnard, CA. Waterway, committed to innovation & excellence since 1973. 2"S x 2"S x (2) 3/4"S Ports ...

Description CMP Natural Wonders® 25597-200-900 Adjustable Deck Jet Nozzle Replacement Only - This Nozzle is for use with the CMP Deck Jet. The nozzle is hidden from view by a decorative cap. The deck jet is designed for simple installation and trouble-free use in residential and commercial pools.

DescriptionWaterway Plastics 519-6560 Mounting Extension Ring For Renegade Gunite, Vinyl Liner & Fiberglass Skimmers

Fits Hayward SP1082, -1083, -1084, -1085 and -1086 skimmers7 in. lip, 6.5 in OD x 5 in deepIncludes handle

Product Description The FlowStar® Skimmer stands out with its adjustable collar and weir clip lock, ensuring a secure fit and operation. It incorporates a gunite grip water stop to eliminate leaks, and its large debris basket is designed to lock in place, preventing it from floating. Noise reduction is achieved through underwater dampers. The skimmer's durability is enhanced by its construction from strong engineered polymer and heavy-duty PVC, eliminating the need for transitional glue....