Products 1-11 of 11
Show
 Z-Flex Z-Vent, Termination Elbow, 45 deg, Single Wall, 4" Diameter
Add to Compare
Price: $67.12
View
Availability: In Stock
NovaFlex Group Item #: 2SVSTEX0445 -

     Z-Flex Z-Vent, termination elbow, 45 deg, single wall, 4" diameter

     Z-Flex Z-Vent, Wall Termination Box, single wall, 4" diameter
    Add to Compare
    Price: $52.38
    View
    Availability: In Stock
    NovaFlex Group Item #: 2SVSTB04 -

       Z-Flex Z-Vent, Wall Termination Box, single wall, 4" diameter

      The Z-FLEX - Special Stainless Steel Vent Systems Z-Vent, z vent, z-flex,
      Add to Compare
      Price: Pricing Varies Contact Us To Find Out More
      View
      Availability: In Stock
      NovaFlex Group

        Z-Vent Model SVE Special Gas Vent System Z-Vent is a factory built, engineered AL29-4C special gas vent pipe, suitable for positive or negative pressure. Z-Vent is UL tested and listed to UL1738/S636. CAT II, III, IV venting approved. Use for all Type III venting applications: All Pentair and StaRite MaxETherm and MasterTemp heatersAll Zodiac/Jandy Jxi heatersAny heater requiring positive pressure ventingFeatures and Specifications:Gasketed connectionsFusion welded pipe seamsNo sealant...

        Z-Flex Z-Vent 4" Diameter Vertical Condensation Drain Tee
        Add to Compare
        Price: $73.84
        View
        Availability: In Stock
        NovaFlex Group Item #: 2SVEVWCF04 -

          Z-Flex Z-Vent 4" Vertical Condensation Drain Tee This is the best piece to use as a secondary condensation drain point for all vertical venting installations. This drain tee acts as a 90 degree angle, but it has a reservoir and a drain point to easily remove rain water and condensation that may come down the exhaust system.Z-Flex Z-Vent stainless steel vent pipe is ideal for the Bosch Therm 940ES / Bosch Therm 830ES / Bosch Therm 660EF / Bosch AquaStar 2700ES / Bosch AquaStar 2400ES /...

          Z-Flex Z-Vent Double Wall 15/30/45/90 Degree Elbow 4"
          Add to Compare
          Price: $122.08-$156.92
          View
          Availability: In Stock
          NovaFlex Group

            Z-Flex Z-Vent Double Wall 15/30/45/90 Degree Elbow 4"

            Z-Flex Z-Vent Double Wall Pipe 4" Diameter, 6" to 48" Long
            Add to Compare
            Price: $53.62-$251.36
            View
            Availability: In Stock
            NovaFlex Group

              Z-flex Z-Vent Pipe Double Wall 

              Z-Flex Z-Vent Single Wall 15/30/45/90 Degree Elbow 4"
              Add to Compare
              Price: $61.02-$70.06
              View
              Availability: In Stock
              NovaFlex Group

                Z-Flex Z-Vent Single Wall 15/30/45/90 Degree Stainless Steel Elbow 4" Double Wall Stainless Steel, Category III Venting

                Z-Flex Z-Vent Single Wall Pipe 4" Diameter, 6" to 120" Long
                Add to Compare
                Price: $22.18-$221.46
                View
                Availability: In Stock
                NovaFlex Group

                  Z-flex Z-Vent Pipe Single Wall 

                  Z-Flex Z-Vent Support, Single Wall Pipe 4" Diameter
                  Add to Compare
                  Price: $58.62
                  View
                  Availability: In Stock
                  NovaFlex Group Item #: 2SVSWS04 -

                    Vent supports are used to provide support to the vent system while maintaining proper clearance to combustible materials. As vertical supports are required after any 10ft run. These supports may also be used to support long horizontal runs, which require support every 6ft. Can be used on horizontal and vertical runs.

                    Z-Flex Z-Vent, Adapter, Double Wall Pipe to Single Wall Pipe, 4" Diameter
                    Add to Compare
                    Retail: $128.40
                    Price: $94.50
                    View
                    Availability: In Stock
                    NovaFlex Group Item #: 2SVSDA04 -

                      4" Z-Vent Double Wall to Single Wall Adapter Used to adapt Z-VENT double wall to single wall pipes or flue outlet collars.

                      Z-Flex Z-Vent, Wall Termination Hood w/ Damper, Single Wall, 4" diameter
                      Add to Compare
                      Price: $83.88
                      View
                      Availability: In Stock
                      NovaFlex Group Item #: 2SVSHTD04 -

                        Vent Termination Hood with backflow preventer (damper). Single not double wall pipe, but will work properly with double wall pipe. Essential for tankless water heater venting, as it prevents freezing air from entering into the venting system and freezing the heater's pipes, damaging the heater and voiding the warranty.Flange dimensions for the 4" diameter hood: 7.25" x 7.25".Made in America Features:• Simple gasketed connection requires no sealant• Offers the highest pressure rating available•...