Installation Services

Service Includes: Record field specifications of existing cover system.Order and deliver cover, (cover listed separately).Removal of existing cover and retract ropes or cables.Removal of leading edge.Installation of leading edge in/on to new cover fabric assembly.Installation of new cover fabric assembly.Measure, cut, secure and adjust cover rope or cable assemblies.Operate cover to full open/close cycles.Adjust ropes or cables and tension. ...

Heater Replacement Replacement service for replacement of existing failed heater with new heater of the same model or type. Disconnect heater from existing plumbing, electrical and ventilation.Remove existing heater, heater left on site for owner disposal.Install new heater on existing equipment pad.Connect heater to existing plumbing utilizing unions.Connect heater to existing ventilation.Start up and test heater for proper working order. New Heater Installation or Upgraded Replacement...

Services Include: Verification of chair size, type and style compliance for intended application.Verification of chair location to comply with ADA guidelines.Location and mounting of (3) or (4) mounting anchor and bolt style anchors.Core drill for anchors – verification of adequate concrete thickness.Installation of anchors.Connection to adequate existing bonding grid wire at anchor location.Structural epoxy in place.Allow to cure. ...

Safety Cover Installation  This service applies to original, (new) or replacement, (previously installed anchors), mesh or solid style spring loaded safety covers. Services include the following: Secure Pool Cover dimensions – New Cover:Secure Pool dimensions.Secure deck and obstruction dimensions.Field verification is available if not provided by customer.Secure Pool Cover dimensions - Retrofit Cover:Secure existing anchor locations.Secure deck and obstruction dimensions.A.) Field...

Filter Replacement Replace existing failed filter with a new filter of same model or type. Disconnection from existing plumbing utilizing unions, if no unions are present, the filter will be cut out.Removal of the filter media.Old filter and media left on site for local disposal.Remove existing filter.Installation of new filter is the same location of old filter.Connection of multiport to the filter union.Installation of filter media per manufacturer's specifications.Start up and test system...

Underwater Light Install Turn off power to the light at junction box.Remove existing pool light from niche and cut cord of existing light.Attach pull string and pull existing light cord from junction box to light niche.Pull new cord through existing conduit to junction box.Connect new light cord to at junction box.Install new pool light in niche and secure.Turn power on to test light.Operate light to check connectivity. ...

Services Include: Field Specifications of pool as-built dimensions.Preparation of pool interior surfaces.In house engineering verifying liner specifications.Replacement of all gaskets.Production and shipping of liner.Drop, position and vacuum-set new liner into place.Freight and delivery of liner to job site.Start of fill water.Emptying of pool and removal of existing liner (may be done prior to liner specifications).Cut in of all fittings, lights, stairs, etc. ...