Chemical Feeders

Description This Stenner Pumps UCCP205 #5 Santoprene Pump Tube is for the 45, 85, 100 & 170 Series Adjustable & Fixed Pumps. The pump tube comes with 1/4" ferrules and there are 2 included in this pack. Stenner's pumps have a modular design that makes replacing their components simple and quick.

Description This Control Valve is designed for use with an inline tablet feeder. It works to regulate the flow of fluids. Replace this valve as needed for optimal performance of your system.

Description The Pentair R172086Z is a 1/2" Control Valve. This valve is essential for monitoring the flow of fluid in your system. It is a genuine Pentair product.

Description This Blue-White Industries 72000-550 is a Retrofit Kit for A-100N Series Peristaltic Pump this kit allows new style A-100N tube assembly to retro-fit into older style pump head. Ships with qty 1 Clear Cover (71000-156) and qty 1 Adhesive Spacer Pad (90012-399). Place adhesive pad onto the inlet and outlet side of the pump head. The pad helps to secure new style tubes (model A1-1T, A1-2T, A1-3T, A1-4T, A1-5T, A1-6T, A1-7T and A1-8T) in the pump head. Kit ships with further...

The CCH® 73100 Endurance Cal Hypo Tablet Feeder for Pools is an automatic solution that meets the needs of modern pools. With the simplicity of an erosion feeder, the CCH® Endurance feeder’s streamlined design is easy to install, service and requires minimal operator attention. This sleek, easy-to-use calcium hypochlorite feeder represents the latest in high-tech pool performance, delivering clear and sparkling water with minimal effort.time and time again. ...

Description The Blue-White Industries C-346 is a ceramic hose weight manufactured for hypochlorinators, built to hold a foot valve or strainer at the bottom of a holding tank. It is a genuine Blue-White product.

DescriptionPentair R172248Z .5" Inner Check Valve for Automatic Chlorine/Bromine Feeder #320X

DescriptionFreestanding model ideal for retrofitting existing pools for automatic sanitization Installs easily on the pressure side of the pump, downstream of the filter and heater Clear pipe shows amount of chlorine/bromine in the unit without removing the lid Features Freestanding model – ideal for retrofitting existing pools for automatic sanitizationInstalls easily on the pressure side of the pump, downstream of the filter and heaterClear pipe shows amount of chlorine/bromine in the unit...

Description The Rainbow 320 In-Line Automatic Chlorinator is the easy way to sanitize large Pools These heavy-duty, high-capacity feeders provide automatic sanitization for residential or commercial pools up to 658,500 gallons. All sizes operate effectively and efficiently with slow-dissolving trichlor or bromine tablets.

Description The Waterway CLC012-W is a White In-Line Automatic 12 Tab Chlorinator Feeder for Chlorine or Bromine Tablets. This feeder has an advanced design, and ClearWater verses in-line automatic chlorinator creates tablet saturation when using Variable Speed Pumps at all speeds. It is a genuine Waterway product.

Description The Blue-White Industries A-002-4N is a 1/4" pump tube assembly for swimming pool pumps. It is a genuine Blue-White product.

Description The Blue-White Industries A1-7T is a peristaltic pump tube assembly for swimming pool pumps. With a 7/16" outside diameter end on one side and a 3/8" outside diameter tube compression fitting on the other, this tube assembly is compatible with the A-100N model. It is a genuine Blue-White Industries product.

Description The PoolStyle K033BU is a Deluxe Series Small Floating Chlorinator Dispenser. It is compatible for use with 1" Tabs. It is a genuine PoolStyle product.

Description Blue-White Industries, F-3003, Gasket Seal for Flow Meters 1" through 4" .625 Hole NO/FAB, for all pipe and tubing units through 4” Outside Diameter (OD). Product compatibility: F-300 Series flowmeters.

Description The Blue-White Industries, A-014N-4A is a 1/4" anti-siphon valve for tubing with a 1/4" outer diameter. Made of polypropylene, it is a genuine Blue-White product.

Description The Blue-White Industries A-014N-6A is a 3/8" x 3/8" anti-siphon valve with .5 - .25 male pipe threading. It is a genuine Blue-White product.

These flexible tubes are responsible for pumping and dispensing chemicals (like muriatic acid or liquid chlorine) into your pool or spa. Since the constant squeezing action of the pump causes the tubing to wear out over time, they are a standard maintenance item that requires periodic replacement to maintain proper chemical dosing.

These flexible tubes are responsible for pumping and dispensing chemicals (like muriatic acid or liquid chlorine) into your pool or spa. Since the constant squeezing action of the pump causes the tubing to wear out over time, they are a standard maintenance item that requires periodic replacement to maintain proper chemical dosing.

Description The Blue-White Industries F-3052 is a mounting clamp for a flow meter. It is a genuine Blue-White product.

DESCRIPTION Pump Head, Blue-White, A-1600, Nylon

Description The Blue-White Industries 71000-159 is a roller assembly compatible with the A100N model specifically designed for -4T and -6T Pump Head Tubing. It is a genuine Blue-White product.

Description With a rotor made of valox and a roller made of nylon with a bronze bearing, the A100N-7T Roller Assembly was made for A1-1T, A1-2T, A1-3T, and A1-7T Tube Assemblies for A-100 N Model pumps. It is a genuine Blue-White Industries product.

Contains:4 ft. 3/16th ID x 5/16 OD TubingStainless Steel Saddle clampSaddle Clamp Tubing adapterTubing adapter gasket(2) compression nuts

Description The Norprene A-100N is a pump tube assembly for swimming pool pumps. With a 1/4" outside diameter end on one side and a 3/8" outside diameter tube compression fitting on the other, this tube assembly is compatible with the A-100N model. It is a genuine Blue-White Industries product.

Description The Blue-White Industries A1-6T is a peristaltic pump tube assembly for swimming pool pumps. With a 3/8" outside diameter end on one side and a 3/8" outside diameter tube compression fitting on the other, this tube assembly is compatible with the A-100N model. It is a genuine Blue-White Industries product.

Description This Viton Lid O-Ring is for use with CL100 and CL110 chlorine feeders. It is constructed of durable materials. Made for easy installation and use, this part will help ensure the best service life possible.

Description This Stenner Pumps ST138 Weighted Suction Line Strainer is 3/8" in length. It keeps the chemical pump's suction side full with solution. The weighted suction line strainer works for the following pumps: 45, 85, 100 & 170 Series Adjustable & Fixed Pumps.