Preventative Maintenance

Inspection of salt cell and chamber for calcium deposits and scaling. Removal of the salt cell.Clean salt cell with a cleaning solution to remove calcification and scaling.Inspect flow sensor.Remove and clean flow sensor, if calcification and scaling are present.Re-install flow sensor, if applicable.Re-install salt cell.Test and adjust chemicals as needed, (chemicals sold separately). ...

Spa Drain and Clean Services Include: Drain all water out of spa.Clean spa walls and floor.Clean spa jets, pillows and components.Clean skimmer basket.Clean filter compartment.Clean filter media as required.Clean and wipe down spa cover.Fill spa with fresh water.Test and adjust water chemistry, (chemicals sold separately).Fill and adjust feeders and automation as needed. Operating review of all circulation equipment. ...

Auto Cover Tune-Ups Auto Cover Tune-ups save time and money by assuring proper operation with preventive care. Two levels of preventative maintenance are available: Deep Clean Includes: Chemical deep clean, brush, scrub, and rinse of the automatic cover.Removal of debris from automatic cover pit.Automatic cover pit is cleaned, rinsed and vacuumed.Dirt flushed from automatic cover tracks.Cleaning of automatic cover pump.Lubrication of automatic cover drum bearings and or bushings (as...

We offer 2 levels of heater preventative maintenance: Tune-Ups Include: Disassembly, removal and cleaning of the burner tray.Cleaning of the combustion chamber.Testing of the gas supply pressure.Testing of the heater combustion and flame quality.Testing of the heater control system including thermostat, high limits, pressure switch and power control interlocks. Overhauls Include: All service above, plus - Removal of the vent cap and/or diverter venting.Cleaning, wire brush and pressure...

We offer 2 levels of filter preventative maintenance: Filter media change Sand filter media change service, for sand filters, by replacing the top level of filtration media only, does not disturb the internal working lateral system. Remove multi-port or top access dome.Remove existing filtration sand from filter.Install new sand or glass media to proper level.Lubricate top closure o-ring.Re-assemble top mount multi-port, (if so equipped), or top closure dome, (for side mount multi-ports).Remove...