Cover Parts and Accessories

DescriptionThe Coverstar H1070 Universal Pulley is a high-quality replacement part designed for use with Coverstar automatic pool cover systems. Featuring a double row of precision ball bearings and a .250" diameter, this pulley ensures smooth, reliable operation and extends the life of your pool cover mechanism.

This replacement component is a specialized heavy-duty hardware piece used to secure pool safety covers to the deck anchoring system.

Description This Coverstar Encapsulation Kit helps you to create additional protective space for your Covertech pool cover track or coping. The kit allows for easy installation, and a flexible, low maintenance design. It is compatible with gunite and fiberglass pools.

This specialized tool is designed for installing swimming pool safety covers. When hammering brass anchors into a pool deck, the tamping pin is placed inside the anchor to protect the delicate anchor rim and internal hex key hole from being deformed or damaged by the hammer strikes.

Description Aquamatic 3/4Hp Electric Motor (Only) for 110/220 Hydraulic Pack Aquamatic’s unique all-fluid dual drive is elegant in its simplicity, yet very robust. The all-fluid drive eliminates the clutch (typical on every other automatic cover), and is self adjusting with no need for lubrication. One motor opens the cover, and one motor closes. Turning the key, which actuates a proprietary solenoid valve to send the hydraulic fluid to the corresponding motors, controls the direction. Another...

Description The Aquamatic Universal slider has to slide down the rope to the front of the cover. Then use the screws to attach the slider to the rope.

DescriptionThis Aquamatic Guide Feed is for a Top-Track Assembly. The guide feed goes on the end of the cover and guides the ropes so they do not snag and tear the cover. This guide feed is made of a Nylon plastic material.

Description DETACHABLE REPLACEMENT ROPE AQUAMATIC COVERS

Description The Cover Pools 50445 Auto-Stop Limit Board 120v with Enclosure is a key component in your automatic pool cover system designed to ensure precise and reliable stopping points for your pool cover by regulating open and close limits, enhancing both safety and convenience. The board is housed in a durable enclosure to protect it from the elements and poolside conditions. ...

Description GLI Pool Products 99-20-9100012 Brass Collar - This Brass Collar is a dependable replacement part. It is constructed of durable materials. Made for easy installation and use, this part will help ensure the best service life possible.

It is a replacement hardware set used for securing pool safety covers or liner track systems.

Gladon Cover Loc JR's are a smaller version of the unique, highly effective Gladon Cover Loc System™. Made of 5 inch long sections instead of 42 inch sections, Cover Loc JR's are an economical alternative to other less effective one piece designs. However, Cover Loc JR's do not offer as much wind blocking and holding power of the full length Cover Loc System. Cover Loc JR's are designed to last for years and consist of interlocking 5 inch long male and female parts made with a flexible, UV...

A dual race track glider LH is a left-hand replacement slider assembly used in automatic swimming pool cover systems, specifically for Cover-Pools dual-race track channels. It helps the pool cover move smoothly back and forth.

A dual race track glider RH is a right-hand replacement slider assembly used in automatic swimming pool cover systems, specifically for Cover-Pools dual-race track channels. It helps the pool cover move smoothly back and forth.

309 End Wall Cap Receiver - w/Liner Bead - 20'

It is used to anchor and secure an inground swimming pool safety cover when the straps must extend past a concrete deck into soft soil, grass, or landscaped areas.

This specialized hardware piece is engineered specifically for interlocking brick, paver, and stone decks. Unlike standard concrete anchor pop-ups, a paver tube is longer (9 inches) to bypass the shifting nature of sand-set pavers. It drives down through the paver into the underlying sub-base, preventing the tension of your pool safety cover from twisting, lifting, or loosening individual patio stones.

Description The Leading Edge Covers C5100 is a 100' Powerflex Rope. This rope is equipped with a Semi-Rigid Tab. It is a genuine Leading Edge Covers product. Branch Availabilityanch

This part serves as a plastic sleeve or shield designed to fit over a 5-inch stainless steel pool safety cover spring to prevent the spring from scratching the pool's decking material.

This part is a smoke-colored vinyl sleeve cover designed to slide directly over an 8-inch heavy-duty stainless steel spring used on swimming pool safety covers. [1, 2, 3] Deck Protection: It prevents the metal springs from scratching or gouging your concrete, paver, or wood pool deck as the cover shifts under tension or wind.Spring Longevity: It shields the spring mechanisms from debris accumulation.Safety: It guards against pinched fingers or thumbs during winter cover installation and...

This heavy-duty hardware piece is engineered to maintain high tension and stability for winter safety pool covers.

DescriptionThis Coverstar Under-Track Slider is used in many different Under Guide/Track Assemblies. This Slider is made out of Delrin Plastic (Polyoxymethylene) and it combines low friction and high wear resistance with the stiffness and strength needed in parts designed to replace metal. It provides a wide operating temperature range, good colorability and good mating with metal and other polymers, as well as dimensional stability in high precision molding. Coverstar uses a detachable rope...

It is a heavy-duty replacement hardware component engineered to secure swimming pool safety covers tautly to deck anchors, preventing the cover from sagging or detaching during harsh winter months.

This replacement set is designed specifically for residential solar reel aqua covers, including Jacuzzi and Cantar systems, providing smooth mobility and stability for your solar reel assembly.

This essential replacement hardware component attaches safety pool covers securely to brass deck anchors.

This protective sleeve is designed to slide directly over standard 8-inch pool safety cover springs. It acts as a visual and physical barrier that shields the spring mechanism from elements and prevents the heavy metal coils from scratching, rubbing against, or staining your concrete, brick, or stone pool deck when the cover shifts under high-tension winter winds.