Wedge Anchor 1/2" x 7", 504NS

Item # 504NS

Parabolic mandrel for a smoother expansion
360° 1-piece clip that functions as a 2-piece clip
Can be installed into bottomless hole
Cold formed for increased strength
Drill an appropriate size hole into base material.
Clean hole using a dust blower or compressed air
Insert the nut with a clearance of 1/8'' to the top of the anchor
With a hammer or light mass, insert the anchor into the hole
Remove the nut and insert the object to be installed
Using a wrench, tighten the nut by turning clockwise until there is a strong resistance. (2 to 3 turns will fully set the anchor).