Valves

Description Hayward TC10050STE 1/2" PVC True Check Valve Socket and Threaded. Check valves prevent backflow. As line flow enters the valve, a ball is moved by the flow pressure allowing flow to pass through and open the valve. As inlet flow ceases or recedes (back pressure), the ball is moved to the seat or seal stopping the flow, thus closing the valve.

Description Waterway positive seal diverter valves have been designed for the most demanding applications. The TruSeal Valve is loaded with features and there is not a longer warranty in the industry.

Description Hayward Pure-Blu™ BYCN1030E1LGB 3" BYCN Series Lever Butterfly Valve. A butterfly valve has a disc that is positioned in the center of the pipe, and by turning the handle, the disc turns either parallel or perpendicular to the flow in varying degrees of open and closed.

Description TW Series Horizontal Three-Way True Union Ball Valve is available in PVC and CPVC, EPDM seals (FPM std) Flanged, Socket or Socket/Threaded Ends and three ball options; TP (0 to 90 Degree), the TN (0 to 45 to 90 Degree) and the TW (0 to 90 to 180 Degree). Assembled with silicone free lubricants and made in the USA

Hayward Pure-Blu™ BYCN1040E1LGB 4" BYCN Series Lever Butterfly Valve. A butterfly valve has a disc that is positioned in the center of the pipe, and by turning the handle, the disc turns either parallel or perpendicular to the flow in varying degrees of open and closed.

Description 311N Series Butterfly valves are ideal for use as throttling valves. With the 10-position index plate, it is easy to repeat consistent flow conditions. Compact in design, this valve is used when space is at a premium. This valve is ideally suited for the most demanding industrial, commercial, aquatic and irrigation environments.

Description This is a large 8" PVC Swing Check Valve. It features a compact utility design and EPDM seat. Ends are socket x socket. NSF Listed for potable water use. Check valves allow flow in one direction (preventing flow in the opposite direction). ...

Description –ASME Section IV and CSA capacity certified bronze "uni-body" Safety Relief Valve for protection of hot water boilers, systems and similar equipment. This valve prevents excessive thermal expansion buildup in plumbing systems, tank applications or tankless water heaters.

Description This multi-purpose check valve provides an extremely low profile and very quick response to back flow without slamming. The special design requires no more space then a piece of pipe, and incorporates a flexible elastomer seal for long life, and is suitable for mounting in any position for greater versatility.

The Type 567 is a wafer style butterfly valve rated for pressures up to 150 psi and temperatures of up to 140° F for PVC and 176° F for CPVC, also available in polypropylene and PVDF. Better chemical compatibility is achieved because the inner body is the same material as the piping. The Type 567/578 Butterfly valves have a unique eccentric design that means the disc is not in contact with the seal in the open position. The result is less wear and operating torques half that of previous...

Hayward BYV11030A0EL000 Butterfly Valve Lever Operated. A butterfly valve has a disc that is positioned in the center of the pipe, and by turning the handle, the disc turns either parallel or perpendicular to the flow in varying degrees of open and closed.

Waterway Plastics, 600-7010, 2" Socket x 2 1/2" Spigot - Straight Body - Swing Check Valve

Description CMP Hydroseal™ 25830-400-000 Black 2" Socket x 2-1/2" Spigot Serviceable Check Valve, CPVC. Traditional check valves are very effective, but can be difficult to service. The Hydroseal™ Thread-On Check Valve has a serviceable clear lid with a lock nut. The clear lid makes it easy to identify problems, and the lid removes easily for servicing and cleaning. The CPVC construction of this valve meets NSF Certification standards. It is high-heat resistant and can be used in temperatures...

Description The Pentair 270187Z is a Replacement Handle. It is compatible for the FullFloXF™ Backwash Valve. It is used to activate the valve. It is a genuine Pentair product.

Hayward - Spears Union Ball Valve O-Ring Fits 1.5 inch Ball Valves, Fluch Union End Features: Black Viton Material Provides Years of Service

DescriptionType 1 two-way solenoid valves can be used on either low or high pressure. The smaller valves are direct acting while the larger valves are pilot operated. These valves are for general application on non-corrosive fluids such as air, water below 180°F, light oils below 300 SUS, and low vacuum. All seal off bubbletight.Please note: All valves sold without coil

Description Economical, low profile quarter-turn shutoff valve is excellent for general purpose and many O.E.M applications. PVC and CPVC valves are available in IPS sizes 1/2" through 4" with socket, regular thread, SR threaded (Special Reinforced), flanged or spigot end connectors.

Description Jandy 4424 24V JJVA Valve Actuator for Versatile Pool and Spa Automation The Jandy Pro Series Valve Actuator fits all Jandy Pro Series NeverLube® and Gray 2- and 3-port diverter valves in 24V models, and works seamlessly with the AquaLink® RS control system.

Upgrade your pool or spa at home today with the TPE24VA 24-Volt Valve Actuator Control from NSI. The Tork TPE24VA Valve Control provides reliable flow control to 2-way or 3-way port valves and a broad compatibility range that makes this control easy to integrate into an existing system. Can be used at home in residential environments or in a range of commercial applications, including pools or spas, water features like waterfalls or spillways, solar heating, and cooling systems, rainwater...